WALL CLOSURES AND OFFSETS AT OPENINGS

Topic outline

• General

  Collapse all Expand all
  • 

    Announcements Forum

• WALL CLOSURES AND OFFSETS AT OPENINGS
  • 

    WALL CLOSURES AND OFFSETS AT OPENINGS Video Time

    Mark as done

• WALL CLOSURE EXERCISE
  • Mark as done

    
    
    
    
    

    ---

    MODULE: WALL CLOSURE AT INSERTS

    
    

    
    
    This procedure has four steps:

    • Step 1: Edit the wall’s Wall Closure at Inserts PROFILE settings
    • Step 2: Set the insertion object’s Plug-in Object Options to USE WALL CLOSURE
    • Step 3: Edit the wall’s Wall Closure at Inserts WRAPPING settings
    • Step 4: Edit the insertion object’s Plug-in Object Options WALL CLOSURE PROFILE OFFSETS

    
    

  • Mark as done

    ---

  • Mark as done

    STEP ONE: PROFILE TAB

    1. Right-click on the wall
    2. Select Edit Wall Style
    • Click Wall Closure at Inserts
    • Select the Profile tab:
    • Edit Edge: Left:
    • Use Settings from Edge: None
    • Exterior Profile Type: Splay
    • (3) Width: 100 mm (3.937")
    • (4) Depth: 100 mm (3.937")
    • Interior Profile Type: Round
    • (5) Radius: 100 mm (3.937")
    • Edit Edge: Right:
    • Use Settings from Edge: Left
    • Edit Edge: Top
    • Use Settings from Edge: None
    • Exterior Profile Type: Straight
    • Interior Profile Type: Round
    • (5) Radius: 100 mm (3.937")
    • Edit Edge: Bottom:
    • Use Settings from Edge: None
    • Exterior Profile Type: Splay
    • (3) Width: 100 mm (3.937")
    • (4) Depth: 100 mm (3.937")
    • Interior Profile Type: Straight
    • Click OK
      
    • Click OK
      
    3. Click OK
       
  • Mark as done

    ---

  • Mark as done

    STEP 2: WRAPPING TAB

    1. Right-click on the wall
    2. Select Edit Wall Style
    • Click Wall Closure at Inserts:
    • Select the Wrapping tab:
    • Edit Edge: Left
    • Use Settings from Edge: None
    • Beneath the Wrap column heading:
    • #1 Render: Check
    • #5 Plasterboard: Check
    • Beneath the Wrap to column heading:
    • #1 Render: Center of Core
      
    • #5 Plasterboard: Center of Core
      
    • Beneath the Wrap to Insert column heading:
    • #1 Render: Check
    • #5 Plasterboard: Check
    • Edit Edge: Right
    • Use Settings from Edge: Left
    • Edit Edge: Top
    • Use Settings from Edge: Left
    • Edit Edge: Bottom
    • Use Settings from Edge: Left [Edit Edge field will update to Bottom (Use Left)]
    • Click OK
      
    • Click OK
      
    3. Click OK

    
    

    ⓘ Of course you may have a different wall style than the one used in the example, adjust the settings to suit your situation
  • Mark as done

    ---

  • Mark as done

    STEP 3: EDIT PLUG-IN OPTIONS

    1. Right-click on the plug-in object (window)
    2. Select Plug-in Object Options:
    • Use wall closure: Check
    • Click OK
  • Mark as done

    ---

  • Mark as done

    STEP 4: EDITING WALL CLOSURE PROFILE OFFSETS

    1. Right-click the plug-in object (window)
    2. Select Plug-in Object Options
    • Click Wall Closure Profile Offsets:
    • (1) Left: -85 mm (-3.346")
    • (2) Right: -85 mm (-3.346")
    • (3) Top: --85 mm (-3.346")
    • (4) Bottom: 0mm (0”) 
    • All Interior Profile Offsets remain 0mm (0”)
    • Click OK
    • Click OK
    3. Select the plug-in object (window) Beneath the Object Info palette Shape tab, scroll down to the subheading Trim
    • Click in the check box for Include exterior trim
    • Width: 102 mm (4")
    • Thickness: 32 mm (1.25")

    
    

    ⓘ If this setting is set to By Style then you will need to edit the window style to add trim